Compact Trackside Split-core sensors
The HTRS product series is designed for measuring DC, AC, and pulse currents with nominal values ranging from 10 to 50 A, providing galvanic isolation.
These split-core sensors facilitate installation on existing power cables without the need for disconnection and reconnection, addressing the traditional inaccuracy issues of split-core sensors due to imperfect contact between the two core halves with unique LEM technology.
Featuring a compact design, HTRS current sensors are intended for DIN Rail or Panel mounting, allowing for different sensor orientations in 90° steps. They come with a 10 mm aperture and a 3-pin standard connector.
Utilizing Hall effect technology, HTRS sensors are specifically designed for smart grid and trackside applications.
HTRS – Features and benefits
Features
- Open loop current sensor using the Hall effect
- Screw mounting or DIN Rail option - Both can rotate the positioning
- Split core design for easy installation
- 10 mm aperture
- Insulating plastic case recognized according to UL 94-V0
- Reverse polarity protected
Benefits
- Easy mounting
- Small size and space saving
- No insertion losses
- Non-contact measurement (doesn't need a safety case)
- DC and AC measurement with same performance
- Performances do not rely on the position of the cable (<0.03 % deviation)
- Low influence from external field
Typical applications
HTRS current sensors, recognized for their capability to measure DC, AC, and pulse currents, are extensively utilized in various trackside environments. Examples of these applications include:
- Points condition monitoring
- Signal light indication
- Battery supplied applications
- Uninterruptable Power Supplies (UPS)
HTRS - Mounting recommendations
Assembly with screw plate
The plate can fix the product in 2 alternative directions (in parallel or vertical of the current direction).
Screw plate fastening: 2 holes or notches ⌀ 9mm (2 steel crews M4)
- Recommended fastening torque (±10%): 1.5 N.m
Assembly with DIN adapter
The DIN adapter (50.34.02.549.0) can fix the product in 2 alternative directions (in parallel or vertical of the current direction).
DIN category: NS 32/15 and NS 35/7.5
LEM HTRS – Download & Technical Characteristic
| Product | Check stock | Document | Primary nominal RMS current | Supply Voltage range | Op. Temperature |
|---|---|---|---|---|---|
| HTRS 10 -SBI 4-20mA inst. | Datasheet 3D | 10 A | 12 to 24 | -40 to 85 °C | |
| HTRS 30 -SBI 4-20mA inst. | Datasheet 3D | 30 A | 12 to 24 | -40 to 85 °C | |
| HTRS 50 -SBI 4-20mA inst. | Datasheet 3D | 50 A | 12 to 24 | -40 to 85 °C |
HTRS Sensors – ASK FOR SAMPLES / QUOTATIONS
Looking to receive samples or a quotation? Please click on the contact button below and provide us with the information you need on this product series. Our sales team will get back to you shortly.