IST Series
Power Supply for up to 6 IT/ITN Ultrastab current sensors.
IST Ultrastab - Power Supply
IST Ultrastab is a power supply unit designed to accommodate up to 6 IT/ITN Ultrastab sensors or an IN 2000-S current sensor. It features 6 individual channels, each equipped with a 9-pin D-Sub female connector for sensor connection, all housed in a 19-inch rack-mounting cabinet. The power supply operates within a temperature range of 10 to 40°C.
IST Ultrastab offers flexibility with both current and voltage output options, which can be accessed via "banana" connections. It is equipped with a universal main power supply (100-240VRMS, 50/60Hz) and includes LEDs to indicate the operational status of each channel.
Typically utilized in laboratory and industrial settings, IST power supplies provide reliable support for various applications.
IST – Features and benefits
Features
- Current output or ±10 V voltage output
- Six individual channels with 9-pin D-sub female connector for IT/ITN/IN current sensors
- Safety standard laboratory “banana” output jacks
- 19” rack mountable cabinet
- Universal mains input (100 … 240 V RMS, 50-60 Hz)
- 15-pin D-Sub male connector for access to status signals for all six channels
- LED indicators showing operational status of unit and of each individual channel (“Operational”, “Not operational”, “Not connected”)
Benefits
- Convenient solution when operating 1 to 6 IT/ITN/IN transducers in one setup
- Integrates in standard 19’’ rack system typically used in laboratory and industrial test setups
- The output current version allows measurement signal to travel long distances by using external burden resistor, i.e., current-to-voltage conversion is done by a precision resistor in attached measurement system (eg.: Power Analyser, etc.).
Typical applications
IST power supplies find widespread use in numerous laboratory and industrial settings, serving various purposes. Some examples of these applications include:
- Laboratory setup
- Industrial test bench
- Analog current measurement frontend for multi-input power analyser, eg. for 3-phase measurements on AC motors, power inverters etc.
LEM IST – Download & Technical Characteristic
| Product | Document | Technology | Supply Voltage range | Op. Temperature |
|---|---|---|---|---|
| IST 400-B ULTRASTAB 10V OUTPUT | Datasheet | Power Supply | 100 to 240 | 10 to 40°C |
| IST ULTRASTAB | Datasheet 3D | Power Supply | 100 to 240 | 10 to 40°C |
IST Sensors – ASK FOR SAMPLES / QUOTATIONS
Looking to receive samples or a quotation? Please click on the contact button below and provide us with the information you need on this product series. Our sales team will get back to you shortly.